As you can expect, half my life appears to be talking to people that have a new pedal day. Often it’s on Social Media congratulating them, or maybe it’s after I’ve advised them what to buy, or in rare cases talking to them if something isn’t right or they don’t bond with it.
This week marked my first personal NGD in over a year. A Helix HX effects.
Before I give you my thoughts on it, I want to tell you why I’ve gone down this route as it appears to surprise a lot of people, but in reality, it’s just the next logical step for me. So, before I write about that, I want to write about the board that I am saying farewell too and the reasoning behind it.
When I started gigging again it was after a short 17 year hiatus from being in a regular band. I was nothing short of prolific in the 90’s and I got bored. I went from guitar, to bass, to live sound… because you know, I still wanted to gig, but I got bored and stopped doing it... I soon then went to University in a different country. Well, in Wales, but you know, that’s a different country. Four years after going to University I was the proud owner of a nice and shiny law degree and a copious amount of debt. A crippling amount in fact. I had just met the person who would go on to change my life and we got married, two kids arrived completing our family in the 4 years that followed. Because of this, my gear was sold so gigging was just out of the question.
Once I started down the path I am today with Wampler (and back in the music instrument industry again) the gear started to reaccumulate around me and I found myself being able to gig again (I had played some over the years, but it was using someone else’s gear). The only local band that I wanted to play with lost their guitar player (of 24 years) and they asked me, so I said “Hell yes!” My first gigs with the band had a simple rig. My beloved PRS Brent Mason-Polytune 2-Mini Ego-Tumnus-Dual Fusion-FTE-TC Mini HOF into a Fender BDri. It was small, simple and sounded great. But I wanted more.
Over the following couple of years, the board changed from a PT Nano 16 to a two-tier Temple board, Line6 G30 wireless, One Control OC-10 looper that had in it the following… Polytune 2, Tumnus, Paisley Deluxe, Strymon Mobius (split pre and post), Strymon TimeLine, TC Quintessence, TC MiMiQ, TC Mini HOF, Digitech Drop… the TimeLine was replaced by the Source Audio Nemesis and the Mobius by the BOSS MD-500… into the Fender BDri (used as a head) and a Quilter 101MR into a homemade 2x12” cab.
Yes, it got silly.
This is my thought process throughout this. Back in the 90’s I adopted modeling early on with the Roland GP100, into a Marshall 100/100 tube power amp into a 4x12, purely because I liked the control of it. At the touch of a midi footswitch button, I could change everything from the amps to various delays and modulations… It was awesome. But, the dirt/amp channels didn’t sound great. These days, I’m more than happy with my Wampler dirt section as they are so responsive to my touch and volume control, so all I need is a basic decent amp with a good clean sound and my dirt needs are covered… but boy do I love having custom mod and delay patches set up for songs. It gives it that extra bit of sheen I couldn’t get from something that wasn’t programmable. I 100% compromised on the tone and purity of the FTE for the TimeLine… that was improved with the Nemesis. The Mobius was a new addition as I didn’t have any mod before… and the MD-500 improved on that. So, that was my gear journey up to this point.
And now the reason for getting the HXFX.
Three years ago I did something rather nasty to my spine which resulted in me literally spending 6 months on my back. I couldn’t stand, walk or even sit down. Fortunately, my job is a “home working” position so I was able to do everything I needed to from my bed. Once I finally had the operation to put it right (which the surgeon said “You have the 1 in a 1000 version of this, the worse it can be”) I was back up and about again, ready to get out there… and I joined the band 2 months after. It was between then (Feb 2016) and now that the board grew to the silly state it is in now.
Then, the horrible thing happened… Two weeks ago I was lifting my board into the back of my car and my back screamed “NO” at me. It was, fortunately, a warning shot across the bows. For a couple of months, I had been suffering a tightening across the small of my back after gigs, but I put that down to being 45 and generally unfit but this was different. This was my back say “That’s enough Jay, sort your shit out mate, I can’t do this much longer”. With that, I had a decision to make. It’s obvious that I can’t keep carrying around this monster board so I needed something that will meet me in the middle. And then I discovered the Helix HXFX. So, I got one. The main thing that attracted me was the ease of use of programming it, I detest reading product manuals and this is easy to use as it’s all on the little screen things, so for a Luddite like myself, it’s perfect.
First Impressions… it’s great. There are a few things I’m compromising on in terms of tone using this, but I can live with them. You see, I’ve gone back to the PT Nano 16 again. So, it’s Line6 G30 receiver, into the Helix, Tumnus and Plexi Drive in the loops, out to a Black 65 and into the Quilter 101MR. It can do everything the other rig can do, almost identically, but weighs ¼ of my previous board. The Quilter weighs literally 1/50th of the BDri and with a Black ’65 in front of it set to zero gain makes it sound like the Fender, or close enough in a live pub band situation. I’ve gone from 4 painful trips back and forth to the car each way to doing it all in one go easily.
I’ll come back in a couple of weeks and give you the full rundown of how the rig stands in a live situation, but so far, it’s looking and sounding really good. The Helix HXFX has a lot of limitations and a couple of glitches I will need to work around, but I am confident I’ll find a way. Most importantly, it gives me loads of opportunity to talk to my friend Ross at Line6 who just LOVES it when I start to pick apart their product and say things like “Why does it do that, that’s a bit silly” and “we would have done this differently” as only industry friends can… it’s the simple pleasure of this job!