Tips For Stacking Overdrive and Distortion Pedals

When it comes to guitar pedals/effects, there are endless possibilities of combinations to create the perfect tone for the scenario that you’re in, whether it’s just jamming at home with a jam track or in a live band setting in front of a packed venue.

One secret to finding that elusive perfect tone is to use two dirt pedals “stacked together” to cascade your gain structure instead of just running a single drive pedal with the gain all of the way up, or running a dirt pedal into a cranked amp. The term “stacking” refers to connecting more than one overdrive, distortion, or fuzz pedal together and using them both at the same time. In order to get these “stacked” pedals to sound and work properly you’ll need to use them a little differently than you would if they were ran alone. There are several advantages to doing this, including extra control of the nuances of your EQ to how the gain reacts in terms of the bloom of the notes. Here are a few tips when configuring your stacking setup to maximize tone:

  • When stacking 2 dirt pedals together, the second pedal in the chain dictates the overall tone of the stack. What does this mean? Let’s use a TS-9 tube screamer and the Plexi Drive (JTM-45 style overdrive) as examples. If you run the TS before the Plexi Drive, whatever signal is leaving the TS is going to use the Plexi as a “gateway” of sorts. This means that the EQ and the clipping on the Plexi Drive will change the way the TS sounds. By nature the TS is mid-heavy, which is great for cutting through the mix. Once it reaches the Plexi Drive, the circuit itself will take that signal and adjust the frequencies it sees according to the knob position treble and gain positions. So if you have the mid hump from the TS, but have the natural light mid-cut from the Plexi Drive, that mid-hump will be less pronounced and the gain will just add to the overall level of saturation. This will give your gain a larger, “wall of sound” effect, while placing the TS AFTER the Plexi Drive, the TS will impart that more noticeable inherent mid-hump. If you have a favorite pedal that you like as your “base tone”, you’lll either want to put that last, or put a very transparent boost (even just a clean boost) after it. One of my favorite tricks to use in a band is to use a tube screamer in a very clean gain setting and simply turn it on for warm, cutting EQ for solos. This works great to cut through the mix without raising the volume dramatically.
  • Cranking the volume on the first pedal in the stack will not raise the volume, but will increase the clipping (gain) in the second pedal. When stacking 2 pedals, remember that volume before dirt = more gain, where volume after dirt = more volume. Again, the 2nd pedal acts as a “gate” and dictates the overall volume. Cranking the output of the first pedal will push the input higher and clip the signal harder. This will make a big difference, because if you want a volume boost for a solo, you’ll want to put it 2nd in the stack.
  • Using an EQ pedal after your drives can help better sculpt your dirt tones. Likewise, using a drive pedal last with plenty of EQ flexibility helps similarly.  When you add an EQ pedal into the stacking equation, your options open up tremendously, especially based on what EQ pedal you’re using. We live in the golden age of effects pedals, so there are loads of great EQ’s out there, some that just adjust basic 3-band EQ (Bass, Mids, Treble) and there are some that let you fine tune the exact frequency of the signal to add or cut whatever you want in your tone. Getting lost in the mix using a big muff? Crank up the mids a bit. Want a little bit of added depth in a smaller venue? Adjust up the bass frequencies to fill out the sonic canvas. This also applies when using the amp for dirt, by sticking the EQ pedal into the FX loop of your amp, then you have access to a boost and can adjust your amps gain tone to the closest detail to get that perfect tone.
  • Stacking dirt pedals into an already distorted amp can add a depth and level of saturation to your tone only capable from stacking. Players have been using this method for decades to achieve their signature tones on classic records. A favorite of many people has always been a Plexi paired with a TS, which is used to boost the mids for solos. Another stack that happens often is using a Fender amp on the edge of break-up, and a Klon-style boost/OD to kick it into the stratosphere. One of the most popular and widely known stacks revolves around running a cranked fuzz face into most any type of amp (especially Plexi-style amps). The fuzz face provides a thick, wall of sound that’s great for fat sustaining leads or for chunky rhythms.

Keep in mind that there are no wrong ways to stack your gain! Some of the most surprising stacks may lead to the coolest tones. Don’t be afraid to experiment and create unique combinations that can fit any scenario you need, from two low-gain drives to provide a base tone that you can stack on more gain for solos, or a boost hitting a distortion for sustain and saturation galore.

Here is a video we released recently that details and shows examples of stacking:

A few fun Wampler-related stacks that work really well together:

  • Tumnus into the Pinnacle Distortion. It adds a low-mid presence that just punches through the mix and sustains for days.
  • Clarksdale into the Plexi Drive. Reminiscent of cranked Plexi tones that have an added presence and depth from the EQ shape on the Clarksdale
  • Velvet Fuzz into Plexi Deluxe.From tube driver-esque tones to full on Hendrix, this is the go-to combo for great classic fuzzy blues.
  • Tumnus into the Euphoria. The perfect yin and yang. The Euphoria sounds like your amps natural OD with a D-style amp feel, and the Tumnus’s low-mid presence and warmth creates a 3D tone that works for a plethora of styles of music.

There are a lot more out there. What are some of your favorite stacks?

 

Note: This article updated May 20, 2020 by Brian Wampler

The owner of this website has made a committment to accessibility and inclusion, please report any problems that you encounter using the contact form on this website. This site uses the WP ADA Compliance Check plugin to enhance accessibility.
0
    0
    Your Cart
    Your cart is emptyReturn to Shop