I’m pretty old – currently staring down the barrel of being 45… So, I groan when I get up from the sofa and my idea of a great concert (as someone attending) is whether it is seated and how easy the access is to the ‘facilities’. Whereas this may sound terrible to some (especially me to be honest), it does mean one thing – I’ve been playing live since I was 17 so I’ve been thinking about this kind of stuff for a long time. Along the way, having done over a thousand gigs, I’ve picked up some knowledge about some things that I might not have thought about before.
This week I want to talk about speaker placement when you perform… When I was a nipper, before the gig time, I had to keep my sound levels down low at home, because – you know, parents. I quickly found out the best way to do this was to lean my amp back (up against the wall) so the centre part of the cone was pointing at my ears. During this time, I wanted to be Jannick Gers before I knew that Jannick existed… basically, I wanted to stand between Smith and Murray on your bog standard Iron Maiden world tour. My bedroom came complete with a full-length mirror so quite often I was stood with my foot on the bed in that classic “on the monitors” way and other various poses the band are known for admiring my potential for being in the band... It was during this time I realised that where the speaker was pointing made an enormous difference to how I heard my guitar. It was either muffled if I wasn’t dead on, or bright and clear when I was. Based on this experience when I started with my first band I used to put my amp on stuff to make sure it was at head level as much as possible – I found that not only was it the best way to keep my stage level down but also the very best way to know that the people out front only heard what I was hearing. From there I went on to live mix large bands around the circuit which taught me also that in regards to upper mids and high end, speaker placement is absolutely everything. The lower the frequency goes, the more omnidirectional they become (this varies with speakers size) so you can put them anywhere and they’ll be heard, but those high ends have to be facing the right direction and high enough to literally go over the head of people, otherwise anything further than 10 feet from them with people in front of you, they are just gone.
Now, any self-respecting guitar player will be able to tell you that the best tone you get from your amp (providing you aren’t on a weak hollow stage) is to have your amp on the floor, but this is a nightmare for the people out front – you can’t hear your top end if you have your tone going into your calves, and also, if you are anywhere near the drummer you have to be literally twice as loud to hear yourself. I can’t begin to tell you how many times I’ve seen a band where the guitar amps are on the floor and the first few rows have been slaughtered by sheer volume and gnarly top ends while the player thinks he sounds incredible.
With all that in mind, where do you put your speakers when you play live? Are they on the deck, or are they elevated? The current band I’m ruining is set up like this, my cab sits on top of a flight case, it’s a 2x12” (and I have it vertically) with the head on top. This means that because I am stood anywhere between 1 and 10 feet from my cab (usually about 2 or 3 tbh), at all times the top speaker is sitting close enough to head height for me to hear it properly. I have to have my cab a certain way ‘up’ as one of the speakers is truer on the higher end and the other is more about warm mids and lows. The top speaker has to be looking at my head, so I can keep the high end under control. As I play in a band that borders on country music, I have my cleans set on very clean with some sparkly high ends going on, so I sit on that verge of being shrill if I am not careful. I am so paranoid about this that I often hold my nose and blow down it to pop my ears out to ensure I am hearing all the highs properly… Something Mrs Wilding finds most amusing!
My current live speaker set up... vertically aligned so I can hear what I am doing... I don't play shoegaze, I promise...
Well, that’s the story part of the piece out of the way – what about the facts that support it, because we all like the sciencey facts part, right?
Speakers, and the frequencies that they protect vary in directionality. The higher the note, the more directional your sound will be projected. Here’s a little test… play a low E note and then one as high as you can straight after. Do that stood to the side of your amp, then at a 45 degree angle, and then right in front (also do this crouched down if your amp is on the floor). You’ll notice that the low-end notes sound pretty identical in all three but the higher notes will sound much duller when you are at the side.
Most guitar amp speakers are 12” and they demonstrate ‘beaming’ at about 1335hz – that is the frequency they become immensely directional. So, everything below that will feel a lot more omnidirectional. To put this in real guitary terms, a tubescreamer has a hump that is most prominent at 732hz and that’s considered to be a mid-range bump - upper mids is generally thought to be between 1khz and 2khz so everything above the midpoint of your upper mids is being protected in a strict direction. Now, think about standing on a stage with your amp on the floor about 5’ behind you. There is an enormous chance you are not actually hearing the high end of your amp properly, so your tone will be brighter than you think.. chances are you compensate for this by increasing the treble control on your amp/pedals. Now think about all those people who are standing on the floor about 15’ in front of you. Yep, it’s your high end that’s actually hurting them and ruining their night!
There are several companies that try to put a stop to this happening, most noticeably the Deefleex, it provides a deflection panel that sends your upper frequencies up to your ears - this is great - but in order to work properly they stick out quite a bit from your amp, so unless you are playing on a bigger stage, you just can’t use it as it will get in the way... if you don’t have that problem though, this simple solution could make a world of difference to your understanding of how you, and your audience, hears your tone.
While we are talking of speaker cabs, here’s another thing to consider… how you have your cab laying. If you are using a 1x12” cab, the sound will spread out evenly in all directions (this isn’t strictly true, but for the sake of this piece let’s keep it simple), but if you are using a 2x12” cab it will react quite differently. If you have the speakers in your cab aligned horizontally, you will get a bigger spread ‘up and down’ than if you put them vertically which will spread the sound wider. This is why I have my cab elevated off the ground and vertical, so the cab will spread more to the sides that it does up. If I had to put my cab any lower I would put it so the speakers are horizontally aligned, so the sound goes up more. For me, in a band that plays smaller venues, the dispersal of the sound to the sides is WAY more important because there won’t be enough room for a horizontally aligned cab to fill the room with sound. And there’s no point in taking all this gear to a gig if only a few people directly in front of me can hear it, right?
When you are lurking on as many gear forums that I am (it’s no wonder my sanity is often questioned) you start to notice patterns forming, you see the same questions come up, and quite often you get to see some great answers and also some terrible ones. I was explaining to Mrs Wilding a couple of weeks ago that at times it feels like I’m in a room with about 100,000 other people and I can hear all the conversations in the room at the same time… Sometimes, the conversations just pass you by but others stick out, especially when you hear the same conversation happening over and over again.
One of those topics that comes up time and time again is “boosts” – the different kinds and where to place them, even which one… so I’m going to write an answer at my level, which is idiot level, to try to explain it all. This may contain information you already know, but hopefully, it will contain some information that you haven’t consolidated yourself yet so there may be something useful in here for you!
When you boil it all down, there are (in my opinion), 3 kinds of boosts that guitarists favour. A clean boost, a treble boost and what’s often classed as a dirty boost, this could be called a coloured boost, or a tone shaping boost or a multitude of other names. The main consideration when deciding which is for you is what you fundamentally want it to do, and where you plan to put it in your chain. My own live rig runs two boosts, one pretty well up the front and one right at the back. Unsurprisingly, they are both Wampler – the Tumnus Mini sits at the front (after the compression and pre-gain modulations) before the main gain stages and the dB+ is right at the back (well, it sits before the reverb pedal but that is an always-on pedal so it doesn’t count!) and acts as a literal volume boost.
The thing that kinda makes me smile is when someone asks online “Recommend me a clean booster” and the thread instantly fills up with shouts of “EP Booster”, “Tumnus”, “TS” and the like and more often than not no one will stop to ascertain what they need, it may be that they need a dirtier boost or not. I would say that 99% of the time the dirtier version will be better, but you know….
The clean boost does just that. It boosts the output of the signal coming in before it goes out. A lot of them are sold on the basis of a HUGE amount of boost, and for me, that kind of goes against the intention of them. Putting a clean boost in front of your gain stages will just increase the signal going in causing them to clip quicker, so you kind of get more of the same – where’s the fun in that? So, in my opinion, clean boosts are much better situated at the very back of your chain to ensure that when you go in for a solo, everyone can hear you over the rest of the band. Of course, this is not a hard and fast rule, a lot of people love their clean boost in front (especially if you are driving amp gain) because, well… they love their tone. So, happy days. But, once you start enjoying the beauties of a dirty boost it’s hard to ever go back to clean for pre-gain. In a nutshell, the classic clean boost will not add any clipping and it will NOT change the EQ of the signal, as EQ and clipping are so closely connected when you think about pedal dirt, it’s hard to separate them fully.
Kind of self-explanatory… takes the higher ranges of the tone and boosts it, this will in turn cause whatever sits behind it to clip into overdrive much quicker based on the frequencies that are hitting it.
Now, this is where the real fun starts, well it does for me anyway. Thinking about it, I actually use 2 dirty boosts in my rig as I run the c2 side of the Paisley Drive Deluxe into c1 and only tend to use it for high gain stuff… So, why do I do this? Well, it’s all about the options it gives me with tone shaping, and how it makes my guitar feel under my hands. The amps I play with are set at totally clean at all times, so when it’s just the Tumnus that is on it kind of gives it a little nudge, adds very little gain (clipping) and the volume is set to unity. So, it’s not really pushing the amp in any direction, it just throws a gentle EQ curve across everything while giving it a little bite. It’s barely noticeable on the clean sound, but when it’s put on when the PaisleyDog is engaged, it fills it out SO much I can’t really describe it. Everything is warmer, fatter and it really pushes it forward. Not in a way that it makes my guitar sound louder, just fuller. When I then kick in Paisley Drive side (which is effectively set at full TS mode) the combined boosting of the TS frequencies and the K style frequencies produce a wall of sound that is huge. As I use a programmable looper in my rig, I have the following combinations available to me…
1) Clean, 2) Tumnus, 3) Paisley Dog, 4) Tumnus -> Paisley Dog, 5) Paisley Drive -> Paisley Dog 6) Tumnus -> Paisley Drive -> Paisley Dog.
Main Dirve section on the right (c1) with the TS boost on the left (c2)
My hidden boosts. dB+ for final solo boost and Tumnus Mini for pre, pre boost.
Now, the Paisley Drive is set somewhat different than the Tumnus, it’s set just above unity volume with a little more gain applied so when it hits the Paisley Dog side, there is an increase of overall gain as well.
With this in mind, how does all this work technically? The best way to think about dirty boosts is that it’s not about adding clipping to the chain, well, it is, but it’s more about the EQ shapes that they provide into your core signal. EQ is everything! As the Tumnus is a K style and the Paisley Drive is TS style (in one of the modes, and that’s the mode I use it in), I’m adding a largish amount of EQ to my tone when they are kicked in. The TS brings in a hump that centred at around 723hz and the Tumnus centred around 1k (these can and will change when you use the tone controls so that’s not gospel), the change in the character and depth of the main overdriven tone is quite remarkable. It does bring in a little clipping (gain), but you know, what it mostly brings is a jump in response from the EQ stacks, so I can easily control the feedback point and sustains for ever. When people look at the settings on my pedals they are quite surprised how low the gain is set on each, because when they are stacked, the inherent EQ shapes are bringing the gain that’s already there front and centre, with a much more 3D depth... that’s not how it works, but that’s how it feels.
If you are thinking about a booster pedal, think about what you really need it to do and where you should place it in your chain. Are you after a literal boost for your solos or are you looking for something that changes your tone into something else. The vast majority of people want the latter I think, so the choice then is which voicing you want to bring in – most people instantly think about a TS or a K, but then again there treble boosters (that explode those higher frequencies that bring the character of the subsequent drives/gain stages to a whole new place), or pedals like EP booster that bring another element of width and fullness of its own character, I’ve seen a lot of boards that have an EP at the start and at the back, purely because the warmth it brings also sounds great as an end of chain boost as well.
As I’ve now been using the double boost pre-gain for quite some time now, I’m pretty certain I won’t change as it works so well, but, the older I get the more I start to think of downsizing, so who knows? Maybe we need to do a triple pedal that utilizes both kinds in a single box with one killer core gain stage at the end (I wish I was famous, I would totally have that as my signature pedal). With all this in mind… what is a clean boost in your mind – it is about clipping? Is it about volume? Should EQ play a part in this?
A question we get asked a lot is “how does someone become a signature artist and get their own pedal?”. Well, as with everything else, there is no rule book, but if there was one it would contain so many variables it would be impossible to give an explanation of the sure-fire route.
Right now we have a signature pedal at proto stage, one in ‘headscratching’ phase, and another in the negotiation phase, so it’s safe to say that this is subject that’s in my head a lot at the moment. So, for my own benefit in the process of consolidating all the information, I can give you a run-down of what is needed.
Let’s start at the business end of things. Why does a company bring out a signature unit? The obvious answer to that is the mysterious phenomenon known as “exposure”. If you look at our first two, Brent Mason and Brad Paisley (who now has 2, the regular and the deluxe), it’s easy to see why we did it. We were a very young company when Brent and Brian worked on the original Hot Wired, and when it was released it instantly gave us a good reputation and a great platform to market the brand from, and go on to have the brand come to the attention of a lot of people, myself included. I cannot begin to tell you what this pedal did for us as a company… Brent is one of the most respected musicians in the world, so to have his name on a pedal and have him use that pedal on countless recordings was massive to us. A couple of years later, we launched the Paisley Drive (the first release I was involved in) and that exploded the brand to a much bigger audience around the world and it’s safe to say that the high-end pedal world was now completely aware of Wampler and what we could do… 3 years after that, we did the signature pedal - the Dual Fusion - that made everyone say “What?” and has gone on to become one of the best-selling Wamplers of all time.
Tom Quayle was a relative unknown at the time, big amongst a certain genre of players (who followed him fanatically), but to the rest of the world, unknown. What we wanted from Tom was to not only bring the pedal into his genre (which was exploding), but also be part of a pedal that he was already using (although in separate units) that we felt could be massive to the market – provided we could match up our vision for it with his (which luckily for all involved was extremely simple, it was great fun working out how we wanted it and thinking up the features at the time what were revolutionary). He had found his tone with the Euphoria and Paisley stacked, and we knew that a dual pedal with these two elements (althought modified to suit him and the single pedal format) would be enormous. Also, having got to know him, we knew that he would market the living daylights out of that pedal at countless trade shows, videos, social media outlets, and just about everywhere else… Tom is one of the most hardworking guitar players I know that is often appearing at seminars, shows… just about everywhere around the world. We also knew that providing he stay true to himself (which to anyone who knows Tom knows that is what he always does) at some point in the future the rest of the industry was going to catch up with us and his name and picture would all over the place.
What does all of the above mean when looking at it closely it? Well, to a signature artist you have to fall into 1 of 3 categories:
- Is their idea for a pedal so unique and original that you have to sign them up then and there to being this piece of genius to market? (extremely unlikely, I would say impossible – “Hey man, I’ve got a great idea for a new pedal, no one has ever done this before”… the reality is – they may not have done it, but I can almost guarantee you that one of us would have thought about it at some point and gone on to discard the concept.)
- Is the artist in question so famous, and relevant, that just having their name on your pedal will explode your brand around the world? (unlikely, but when they come along, happy days – I mean, no one in their right mind would turn down a superstar like Brent or Brad.)
- Is the concept of the artist/pedal combination something that people will relate to - and will the artist network/promote you so much that the amount of traction gained from your combined marketing efforts going to make something truly special? (the most likely)
Now, it’s fairly obvious that as of today, we’ve had two #2’s and a #3 in our list. A lot of people mistakenly think that in order to get a deal you need to be #1 (everyone thinks they have THE next big idea which is usually, well… not so big), a lot of the people who think they are #2 are usually a few years past that point of their career (or are in no way big enough to even think about it) so think it will be a steady income stream for them for doing nothing, yet no one thinks about the concept of #3.
In order to be a signature artist, you have to have something special. Yes, you need to have the talent and ears to make it even to discussion stage, but what about the rest of it? To do it, and do it successfully, you have to work HARD to get there and even harder to keep it going… The main thing to remember that as a business we like to sell a lot of pedals and it is an aggressive marketplace out there with countless elements working against you. We’ve found that the people who even make it past the initial nanosecond of consideration are not in the least bit concerned with the monetary aspect (the commission) and are only interested in realising their vision for their sound by working together, combining ours and their marketing platforms, and most importantly… the vision for the future of both ours and their brand. In a nutshell - you have to jump in with both feet and take a ride with us, and sit right up front!
As you can imagine, I’ve seen a lot of people make a pass at us for signature units, Winter NAMM is a classic one where a lot of players are walking around in dark glasses trying their hardest to be noticed whilst looking like they are trying not to be noticed - and this year, most of the time, all I wanted to say to them is this: “You see that guy over there… the quiet one with the new signature Ibanez, yeah… him. He’s called Tom. Be like him.”
Following on from bDub’s video about the 12 things he’s learned making videos for YouTube (see below), I thought I’d piggyback that and make 12 things I’ve learned being the main social media guy for Wampler in the last 7 years. For those of you who don’t know, I’m the guy that has been the constant with the social media for Wampler since early 2011. Other people have worked with me during that time, most notably Alex who’s been with us for almost 3 years now, but, most of it has been me and my warped sense of humour.
- People have opinions and they think they are facts. People are passionate about music, and they are passionate about their opinions associated with them. Especially when it comes to favourite guitar players. They may love the blues, or shredders, or whatever, but there are a LOT of people who misunderstand the concept of opinions. They have the final word and are prepared to destroy all those who dare to disagree! Let’s face it, we’ve all got into arguments on social media over pointless crap with strangers, but recently it appears to have hit new highs. My ban hammer finger seems to get twitchy much quicker these days.
- Memes are made to be stolen. One of the things that has caused me the most headaches is irate people shouting (well, typing in caps) “YOU STOLE THIS FROM MY BLOG WOT I MADES IN 2013” or something. The unfortunate thing about meme’s and graphics is that once they are on the internet, they spread like wildfire and it only takes one person to download it and put it somewhere else and all traces of the originator are lost forever. Subsequently, there have been times when things I’ve made have come full circle and come back to us, which makes me chuckle, and there have been cases when well-known outlets have been downloading stuff from us directly to reshare… It’s a difficult one, and one I try not to get grumpy about, but… you know… sometimes when a repeat offender does it over and over it becomes obvious and I let myself down and make a snide comment on their thread. I should know better really.
- Everyone thinks that you are the face of the company and you better not show any trace of personality. This is one that happens to me often. I quite often get a *insert expletive here* who thinks he can come on to my own social media presences and tell me off for putting them down when they act like an arse to either me or my actual real-life friends. I’ve been called many names, most recently a Nazi. As you can imagine, that wasn’t particularly nice but I’m a big boy now and sticks and stones and all that...
- Everyone thinks that because you work for a company like Wampler it’s all jamming with Brent Mason, making fancy meme’s and drinking fine wine with Seymour Duncan at NAMM and nothing else. Nah… it’s mainly planning strategy for marketing, B2B selling, watching market trends, trying to predict market trends, justifying decisions made about the current market, the future market and maintaining relationships. Basically, it’s about moving little grey boxes around the world. Sometimes you get the fun stuff, but it’s really really rare.
- Everyone is a world leading expert. On everything. No matter what evidence you place in front of them about running a business, they still don’t see why they should buy a pedal for $200 when they can buy a soldering iron and parts from “Hanks fishing tackle and Radio Spares for $35 and making it their damn self and it being just as damned good”.
- People think that who you are online is who you are in real life. What people have to remember is that working from home and doing online stuff can be kinda boring. When I get bored I partake in the age-old English past time of taking the piss. Although I do it in my real life, I pretty certain I’m not the stereotypical grumpy Englishman people think I am, or appear to be – here’s the thing, I often have to play bad cop to Alex’s good cop when dealing with trolls and people who don’t know when to stop talking. I dunno, maybe I am grumpy… but my wife tells me I’m not, and I’m not man enough to disagree with her on anything.
- People will tell the world with righteous indignation about bad things with a company on social media before even venturing into speaking with the company about the issue. Or, they will expect you to be online to sort their problem out 24/7 and have the answer for you in seconds. How many times have you seen “I’ve not received a response from them when I mailed them”… most of the time it will be 2 am on a Sunday, they’ve emailed you through the website and 10 minutes later they’ve gone out in public slamming you for the problem and your unprofessional way of not getting back to them. It’s massively frustrating, but you know, I’ve got to poop at some point!
- People will look for a correlation of events and try to draw conclusions from them, and they’ll do it all the time. “Yeah, well, Brian said he likes Uni-Vibes and next doors cat looks like Brian’s, he said the word vibe and wet in the same paragraph in a video in 2016 so I KNOW that a WampVibe is coming this year!”. Or something like that. You’ll know when stuff is coming because we’ll tell you. I mean, it’s not in my nature to tease people at all or anything like that **ahem**
- You get free stuff, all the time. I expect some of you have seen the pictures I post online of ‘my’ gear. The main thing is, it ain’t my gear. It belongs to the company (and others). I actually own 2 electric guitars, about 5 or 6 pedals (none of them are overdrives or distortions) and no amp. So, when I do gigs and take amazing gear, people think I’ve got amazing gear coming out of my arse. I don’t. I’m just lucky that this particular job means I have to have it here, for marketing. So, you know, it ain’t all bad…
- You spend all day chatting on social media. This is the one that confuses me the most. I am prolific on social media when I’m working, within the realms of my job – watching and analysing. But, once I take the work hat off, I disappear completely for a period of time. I am a family man and I protect the relationship with my wife and kids fiercely, so when I walk away from the computer, you won’t catch me on Facebook. I work from home and it’s 7 days a week, virtually 365 days a year, making multiple posts over multiple platforms for multiple brands. I keep in touch with a lot of our artists and dealers on FB and most of my relationship building is done there, so when I walk away, I walk away. It’s that, or I’ll end up being divorced.
- Fundamentally, most people (and companies) do not understand the concept of social media marketing. Which, in terms of other companies is great!! Hahahaha – KIDDING! But, I spend a lot of time watching and learning on social media, seeing what others are doing, analysing what we are doing and then making decisions on how to proceed based on what I see. I do have to say though, it’s a big rush when I see some of the biggest companies in the world blatantly taking our style and doing their version of it. It’d be better if I got 10% of the fee though! I speak to a lot of people who are allegedly marketing experts and most of them don’t get it. Don’t get demographics, don’t get what it means to try to get into people’s heads in the best possible way. A few do, and when I find them, I talk to them a LOT!
- A lot of people want to take your job. I understand that, completely. I have a cool job and people can think they can do better. Especially on the graphical side. We’ve, well – I’ve, really honed the look of the range in recent years graphically. We made a conscious decision on our look and I’ve continued to produce the graphics according to that plan. I’ve lost count of the number of times I’ve read “Your pedals look shit mate” or something. It’s usually a graphic designer from the other side of the world who’s looking to get the work for themselves. Unfortunately, unless they want to do all the other stuff I do as well, it probably won’t happen. Because you see, we don’t all have one job at Wampler, we have about 4!
Thank you for listening to me ramble and for your support of this blog, this is my first one of 2018 and I hope to be filling your eyes and minds with more irrelevant crap in the future! Despite what I have written above, I genuinely adore my job and interacting with people as much as I do. It's one of life's simple joys to be able to connect with so many people, from so many cultures, from so many countries, each and every day...
... and, there is a lot more to this, but I'm not going to give all my secrets away!
I got in a bit of trouble last week with some people - purely because I encouraged a mass troll of a troll. A lot of people thought it was the wrong thing to do, but in my defence, the guy who was trolling us said something so silly I just couldn’t help it. My bad, I should have known better. This guy was dropping one liners on demo videos saying things like “*insert demo artist name here* will endorse anything that is put in front of him”. Once I’d got over the incredulity of such a ridiculous statement, and having discussed it with Brian and Alex (to be fair, we often have discussions about statements online that are plainly ridiculous and wonder what people are thinking when they say them), I came to the conclusion that there are people out there that don’t appear to have a clue what the difference is between the two. So, I thought I’d lay it out in front of you – I will stick with the pedals as it’s all slightly weird, but this will apply to all aspects of the MI industry…
These are the guys that receive some kind of payment to produce a demonstration of a product. Often paid for (in one way or another) by the company that makes the pedal themselves (or by their distributor) and it’s a fantastic way of getting the pedal out there quickly into the ears and eyes (and then hopefully the hands) of the customer. Now, there are a lot of people out there that want to do this so the competition is fierce. When you look at the demo’s that are turned out by people such as Ola Englund, Brett Kingman or Tom Quayle, not only are you seeing the product, but you are seeing expert levels (with pro-level gear) of photography, videography, audio recording, composition and decades of crafting their playing talent. These are not some chancer with an iPhone 4S and a nice guitar who knows a few riffs, these are people that do this as part of their wider job, therefore they receive payment (and this element is not standardised, some people cost a LOT of money compared to others).
In order for them to maintain our business, as the manufacturer looking to get the product into the customer’s hands, it is well worth their effort to make the pedal look and sound as good as possible. Let’s face it, if a demo artist comes onboard with us and their first attempt is utter crap, they won’t get anything else from us, ever again. So, they HAVE to make it sound good for our sake, but most importantly, for their own.
This is where it becomes an art form. I’ve seen countless videos of Brett Kingman where he has straight up said that “it’s a great pedal, if you like that kind of thing” which can be translated to be saying “It’s not for me”… but, he does everything he does to make it sound the best he can in the video. What does that mean? Well – on a personal level, it makes me trust him, I don’t want to sound like him but I know if I listen to his demos, he makes it pretty clear what it can and can’t do, and I know what it will sound like in most situations. Brett has been doing this for a LONG time, he was the first demo artist I dealt with when I started with Brian in 2010 and he’d been going for a good few years then. It’s safe to say that for me, Brett remains the benchmark in terms of professionalism, honesty and dignity in this business. You know what you are going to get, not only from the demo but also from the unit if you buy it.
I think this is where people get confused, as this is where opinions come into play, and as a manufacturer, it’s a bloody nightmare and has legitimately caused me sleepless nights in the past. A great example of people who review pedals who walk this very fine line are Henning Pauly and Dan and Mick on That Pedal Show. Although, to be fair on the both of them, they aren’t really reviewers, they just do what they do but in this industry, they are the closest I can get.
They are both extremely experienced in their appreciation of music and the weapons that are waged war on to make it, but they have both built their channels based on “I’m not going to bullshit you”. So much so, there are times when I’ve watched them both with our pedals and my heart has sunk out the bottom of my shoes, out the front door, into the gutter and then washed out to sea. BUT… they are both ridiculously popular, so we listen to them, and we learn from them. I, and we, have learned very valuable lessons from their videos that have been invaluable to us as a company in the past. Why? Because they approach it differently, Dan and Mick are the excitable tone chasers that know what they like and everything in their show is done to their liking – so, if they like your pedal, you’re going to sell a shitload, if they don’t… Well, some you win and some you don’t. Henning is a no-nonsense kind of guy that says it like it is, you can’t hide ANYTHING when you send a product to Henning, if he thinks something is stupid, he will say so, and is probably right to do so. Probably. Do they demo? Do they review? It’s hard to gauge, but I think they both kinda review, but not in the way you would expect.
I’m not going to get too far into this one as it can get political, but you know, have you noticed how quite often the companies with the biggest adverts in a magazine quite often have the most products reviewed in that issue? ANYWAY... moving swiftly on...
And, in conclusion…
What are the differences? Well, a demo artist is paid to make a pedal look and sound bloody brilliant – it’s an advert. S/He is paid to advertise the product, by playing it, and for it to be launched either to their own following or you use it to communicate to your own. So, it’s all about reach and getting it into newsfeeds and incite that condition known as G.A.S.. A reviewer is someone that will be more open and honest and give you their opinion on it. Which should you rely on and trust more? The answer, obviously, is both and neither at the same time. What you should do though is not take either of them as gospel and watch and read as much as you can about any given piece of gear and then base your decision purely on how it makes you sound, when you play it, with your own gear.
Unfortunately, an issue has been found with a select number of the new Tumnus Deluxe pedals that have been sent out. We have identified the problem and have already taken steps to rectify it. Unfortunately, a small number of units were sent out before this was completely identified so it may be that the unit you have in your hands is affected.
In a nutshell, the Tumnus Deluxe circuit is immensely complex compared to the mini and other pedals of its kind, and in order to maintain the core tone and response of the circuit, the signal is routed through so much ‘stuff’; the balance of response and tone has been intense, to say the least. The nutshell within a nutshell is that a few of them have issues with the PCB. Although all units shipped will still sound great, they just aren’t working absolutely perfectly.
Obviously, we want to make sure that every unit that goes out fits in with the vision that Brian had in his head, specifically his ears, so we are recalling the units that may be affected for a free mod. There is no easy way to do this, so we are offering you to return the unit to us, on our dime, to be rectified. We will send you a prepaid return label, and as soon as we receive notification (for this, we will require you to email us the tracking details) we will send you a replacement unit that is up to the standards that we, and you, demand from a Wampler product. They will cross in the post, and you will have a perfect unit as soon as humanly possible.
There is a quick way to tell if your pedal has the mod: Any Tumnus Deluxe pedal that have a serial number starting with "M" are ones that have already been fixed and will not require sending it to us. However, there have been a few retailers that have had their tech do the fix so make sure you ask them as well (at least for the batch affected... it may be a different method if you're reading this in 2018 or later).
Brian and all of us at team Wampler are extremely sorry that this has happened, but assure you our attention to the detail that drew you to us originally, is the reason behind this recall and our determination that every single unit out there is exactly right is driving this.
Please email us from here if you are a proud owner of the Tumnus Deluxe and you want the universe of awesome tone to be perfect with this free mod!
*Please note. Free shipping back to Wamp HQ only applies to USA customers, international customers should return the pedal back to the dealer it was bought from!
A few months ago I wrote a ‘review’ of the Quilter 101 Mini Head here in the Wampler blog, it was an interesting experience using the 101 Mini, but tonally it didn’t work out for me. It was great, just not there yet. There were issues with the basic core tone and most importantly, the strange EQ section.
I’ve subsequently got my hands on the newer version of this head, the 101 Mini Reverb, they’ve upgraded the unit considerably, made the EQ a much easier system to dial in and you guessed it, contains reverb. I’ve been using the 101 MR for the last few gigs as the ‘other’ side of my stereo rig, and something happened this weekend that made me look at it in a different light.
First of all, a quick gear rundown so you get a feel what my rig does. My rig is mono until it hits the incredible TC Electronic MiMiQ which then splits it to stereo. The main side of the MiMiQ (which sits after my pre gain modulation the gains stages and compression – so that’s pre gain Strymon Mobius – mainly Vibe - Mini Ego, Tumnus and Paisley Drive Deluxe) sends the signal on to the post gain side of the Mobius (so that’s chorus, tremolo etc), the Strymon TimeLine, dB+ and then to a Wampler Bravado amp. The other side of the MiMiQ just feeds direct to the Quilter 101 MR – both then feed directly into a stereo 2x12” speakers. I have the MiMiQ set on “slight drunk” so when it’s kicked in I find the difference in tone (I set it pretty quickly, on a scooped setting) and the lack of delays etc do a really good impression of a second guitar player.
I play in a pub band, playing covers, and on Saturday night we were kinda cookin’. The crowd was rocking, so we were. My rig sounded fantastic and I ended the first set on a high! I was just having a lovely time… when it came to the start of the second set we started and I noticed that something wasn’t quite right. None of my delay’s where there, so I checked a different patch (the vibe) and that worked, so I thought – oh shit, the TimeLine is knackered. There was something else going on with the sound as well, it wasn’t quite as attacky or bright as usual (I have the Bravado set on Bright position 4 with the mids scooped out so it’s more like a Fender Deluxe than it should be)… For about 3 songs I felt this thing was wrong, still sounded like me, still sounded great (well, let’s face it, with those gain stages how could it not?), but there was a certain something missing. Trust my wife to spot the problem… It the end of the third song she leaned over to me from behind the P.A. speakers and shouted in my ear “Do you know that the Bravado is on standby?”.
So, I had turned the Bravado on to standby at the end of the first set and forgotten to turn it back on again, which is quite funny considering the piece I wrote about putting amps on standby last year. it was just the Quilter being used and I was blown away with the sound of it. Granted, It was not as clear and concise as the Bravado, and the response was different, but it was close. Kind of felt the same way when I first played through a Kemper, really close but the reaction wasn’t there, because it’s a D class and I’m used to a valve amp.
Once I realised my mistake I tweaked the Quilter a little to try to bring the top end in and it got even closer before bringing the Bravado back in. This little thing is quite remarkable when I think about it, I carry it around in my effects case and it weighs about 2lbs and it stood up against the Bravado and didn’t lose without a fight. It took the pedals like a dream, it responded to my pick attack and expression like a dream. The updated EQ section was SO much better in this one, every issue I had with the original was addressed. Basically, this thing is pretty bloody awesome.
I’ve made the conscious decision that when we do the small, quiet gigs – as we often do – and you can’t get a valve amp up to the required level to make it sound like I want too (yes, we really do play that quiet sometimes, literally so you can talk over it), the Quilter 101 MR will be my main amp and the Quilter 101 Mini will be the stereo field. It won’t be the Bravado (as, you know, valve compression and response of a high end amp, there is nothing like it), but at least I can put it to the level I want to play at and I won’t be disappointed with the tone, which when you think about it, is quite remarkable.
I can thoroughly recommend this little amp, and I don’t say that very often. Everyone should have one in the front pocket of their gig bag as a back up, or if like me you want a stereo field, it’s perfect. Actually, if I wasn’t so fussy (I am, extremely) I would probably use it for every gig as let’s face it, the people listening wouldn’t be able to tell the difference in those conditions... It’s close enough to the real thing to be able to warrant the compromise of tone – that magical thing that can’t be replicated - especially when like me you have a history of sciatica and want to keep the weight down!
As a last thought - when the Bravado isn’t here I use a Fender BDri as my main gigging amp… well, I used to, as if the Bravado isn’t here, from here on in I’ll be using the Quilter…