EQuatorThe often overlooked EQ pedal is one of the most powerful devices that you can place in your rig. And if the constant demand for one from Wampler fans is any indication, we admit that the introduction of the Wampler EQuator may be a bit overdue. But we knew that if we wanted your attention, we’d have to take our time to create an EQ pedal with the player-friendly ease of use and demand for top quality that Wampler strives for every day. Instead of the learning curve that can accompany individual sliders for each frequency, we gave you fixed bass and treble controls and two semi-parametric mid controls that are as easy to harness as twisting a few knobs Each knob’s frequencies have been carefully defined (with the sweet spots marked) for the needs of players and to offer one of the most flexible EQ pedals out there. Whether you’re wanting a fully customizable clean boost, the ability to fine-tune the tone of another pedal, or to just bring out the best in your guitar, bass or ANY instrument you choose to plug into it - we crafted the Wampler EQuator to be the tonal sweetener you need to get the job done… Even if you don’t use a pedalboard and are not a guitar player - put this between your instrument and the amp, the P.A., or recording interface… the EQuator will bring it to life.
The pedal for every kind of musician
With its precise frequency control, ample output, and compact design, there isn’t a musician out there who wouldn’t benefit from adding an EQuator to their rig. Bring up only the mid frequencies you want to help your instrument be alive in the mix, dial back the highs to tame any kind of harshness from the room – you can even completely change the character of your favorite drive pedal. With its sheer versatility, the Wampler EQuator will quickly become your not-so- secret weapon.
Find your tone, fast
We designed the EQuator around the needs of the player, refusing to riddle it with too many small sliders or overly complicated switching. Nailing the tone you desire is an intuitive affair that you’ll find invaluable in the heat of a performance. Whether onstage or in the studio, time is at a premium. Get your perfect tone faster with the Wampler EQuator.
It’s all about the width
It’s not about high mids, or low mids… it’s about ALL the mids. With 2 mid controls that cover the entire spectrum, all you have to decide is how wide you want the Q on each. Mids 2 has a much wider Q so it can act like a ‘screamer if you want, Mids 1 has a thinner Q so you can the take a little out of a frequency if needed… it’s all about the control.
Built for Forever
Brian Wampler’s attention to detail and commitment to bringing you the best-sounding & most usable Effects Boxes on the market is nothing new. Those qualities are on full display within the EQuator. We’re all tone-freaks, and we’re always trying new things, but we hope this pedal finds it’s forever home on your pedalboard, so we built it to last that long.
See it in action:
- Built in the U.S.A.
- Battery connection and 9v-18v power jack
- High-grade components selected for their superior sound and response
- Powerful 4 band EQ with 2 parametric mid controls to perfectly sculpt your instruments core tone
- Top-mounted jacks make pedalboard placement effortless
- Power draw: 23.9 mA @ 9V and 31.9mA @ 18v (LED will flash 3 times when power from battery is getting low)
- 2.5″ x 4.50″ x 1.5″ (63.5mm x 114.3mm x 38.1mm) – height excludes knobs and switches
- Includes Wampler’s limited 5-year warranty
WAMPLER Pedals Limited Warranty. WAMPLER offers a five (5) year warranty to the original purchaser that this WAMPLER product will be free from defects in material and workmanship. A dated sales receipt will establish coverage under this warranty. This warranty does not cover service or parts to repair damage caused by accident, neglect, normal cosmetic wear, disaster, misuse, abuse, negligence, inadequate packing or shipping procedures and service, repair or modifications to the product, which have not been authorized by WAMPLER. If this product is defective in materials or workmanship as warranted above, your sole remedy shall be repair replacement as provided below.
RETURN PROCEDURES. In the unlikely event that a defect should occur, follow the procedure outlined below. Defective products must be shipped, together with a dated sales receipt, freight pre-paid and insured directly to WAMPLER SERVICE DEPT – 3383 Gage Ave., Huntington Park, CA 90255, USA. A Return Authorization Number must be obtained from our Customer Service Department prior to shipping the product. Products must be shipped in their original packaging or its equivalent; in any case, the risk of loss or damage in transit is to be borne by the purchaser. The Returns Authorization Number must appear in large print directly below the shipping address. Always include a brief description of the defect, along with your correct return address and telephone number.
When emailing to inquire about a returned product, always refer to the Return Authorization Number. If WAMPLER determines that the unit was defective in materials or workmanship at any time during the warranty period, WAMPLER has the option or repairing or replacing the product at no additional charge, except as set forth below. All replaced parts become a property of WAMPLER. Products replaced or repaired under this warranty will be returned via ground shipping within the United States freight prepaid. WAMPLER is not responsible for costs associated with expedited shipping, either to WAMPLER or the return of the product to the customer.
INCIDENTAL OR CONSEQUENTIAL DAMAGE. In no event is WAMPLER liable for any incident or consequential damages arising out of the use or inability of the possibility of such damages, or any other claim by any other party. Some states do not allow the seclusion or limitation of consequential damages, so the above limitation and exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights which may vary from state to state.
FOR YOUR PROTECTION. Please complete the online warranty registration within (10) ten days of the date of purchase so that we may contact you directly in the event of a safety notification issued in accordance with the 1972 Consumer Product Safety Act.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantees that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experience radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s warranty to operate the equipment.
CUSTOMER SUPPORT. Our dedicated staff is ready to help you with any warranty or product questions – please email us at firstname.lastname@example.org or call us on (765) 352-8626.
Please remember to register your pedal as soon as possible after purchase at the following web page to ensure quicker service if you should ever need to make a warranty claim: warranty registration