Cory Wong: Compressor

The Cory Wong Compressor is a dual footswitch Compressor and Boost pedal with Wampler’s legendary tone shaping controls, a Boost mode switch for either a flat frequency or rich saturated mid boost, unique “Comp On” mode to bypass the footswitch, and XLR connectivity for recording or live use. 

Cory Wong: Compressor

Cory Wong is a Grammy-nominated artist renowned for laying down some of the finest grooves across all genres. The Wampler Cory Wong Compressor is at the heart of his legendary tone. More than just a Compressor and a Boost pedal, this dynamic toolkit shapes your tone with sparkling cleans and responsive compression either direct to your amp or straight into your recording interface. Prepare to find the funk!

The Wampler  Cory Wong compressor features two soft footswitches that operate each function of the pedal. For the Compressor side there is also complete control over Volume, Sustain, Attack, and Blend as well as Brian Wampler’s signature Tone control which can be dialed in to add sparkle and chime to your guitar’s tone.

For the boost side there is a single rotary boost control that adjusts the amount of boost activated and a profile switch that sets the mode of the boost circuit from a flat boost to a rich saturated  boost with an extra vibrancy around the 550Hz range. The Blend control controls the amount of dry and compressed signal in the compressor circuit.

The Compressor is operated by the independent  “Compress” footswitch on the left, the LED will turn green when active. The Boost is controlled by the independent “Boost”  footswitch on the right and the LED will turn blue when the boost is active. This particular boost was based on the classic MDX Strat boost style circuitry (once favored by Eric Clapton).  When both sides are active, the LED turns Rainbow white. On the right hand side of the pedal there is a “Comp On” switch which permanently engages the compressor circuit when depressed - useful for a live environment where you want to really just stomp down for boost. The left hand side has an XLR socket to go direct to a PA system or mixing board, and a “Ground Lift '' switch which can be used to eliminate unwanted ground noise.

The Wampler Cory Wong Compressor delivers all of this with the premium build quality Wampler is known for.

(2 customer reviews)

$269.97

In stock

SKU: WMP-CWC-PED Categories: , Tags: , ,
Cancer and Reproductive Harm www.p65warnings.ca.gov

Get Boosted

Cory was keen for a choice of boost, that allowed him to choose either a flat volume boost or a rich, saturated boost that could push his midrange a little when the boost switch is engaged. There is a single rotary boost control that adjusts the amount of boost activated and a profile switch that sets the mode of the boost circuit from a flat boost to a rich saturated  boost with an extra vibrancy around the 550Hz range.  

Two switches, no dancing

There are two footswitches which each control the functions of the pedal. When Compress is switched the LED will turn blue. When the Boost is switched on the LED will turn green. If you have both the Boost and Compressor active the LED will turn Rainbow white. Use the Comp On switch to permanently engage the compressor and avoid the pedalboard tap dance when you want to add boost!

Go straight into your DAW

The pedal features a Wampler first –  a balanced XLR output enabling it to be plugged directly into a computer interface, mixing desk, or PA for those signature bright and clean tones. Theres an independent switch to lift the ground in case of additional hum.

Total Tone Control

The Compressor side offers complete control over Volume, Sustain, Attack, and Blend as well as Brian Wampler’s signature Tone control which can be dialed in to add sparkle and chime to your guitar’s tone. 

See it in action:

Technical Details
  • Built in the U.S.A
  • Exclusive Cory Wong Signature
    Compressor + Boost pedal
  • High quality op-amp buffered bypass
  • Dual switch-able modes (Compression
    and Boost) in a single enclosure
  • Boost mode switch for either a full
    frequency or rich saturated boost
  • XLR Out and Ground Lift switch for
    direct connection to PA, Mixer, or Audio
    Interface
  • Attack, Tone, Sustain, Volume and
    Blend controls for compressor
  • Separate Boost level control
  • Unique “Comp On” switch to
    permanently engage compressor
  • High-grade components selected for
    superior sound and response
  • Top mounted input and output jacks
    and power connector
  • Dimensions: 2.5” x 4.6” x 1.5″ (64 mm x
    120mm x 38mm) – height excludes
    knobs and switches
  • Power draw: 30mA, 9V DC – Do not
    exceed 9V DC
  • Includes limited 5-year warranty
Customer Support

CUSTOMER SATISFACTION GUARANTEE. Wampler offers a 30 day no questions asked return policy on any pedal purchased through the wamplerpedals.com website. In order to satisfy the requirements for the return the pedal must have the battery inside, complete with all original packaging and all in as new condition. Please contact us via [email protected] to arrange (please include your order number) the return. Please note, any pedal bought through a dealer is not applicable – please refer to their specific returns policy.

WAMPLER Pedals Limited Warranty. WAMPLER offers a five (5) year warranty to the original purchaser that this WAMPLER product will be free from defects in material and workmanship. A dated sales receipt will establish coverage under this warranty. This warranty does not cover service or parts to repair damage caused by accident, neglect, normal cosmetic wear, disaster, misuse, abuse, negligence, inadequate packing or shipping procedures and service, repair or modifications to the product, which have not been authorized by WAMPLER. If this product is defective in materials or workmanship as warranted above, your sole remedy shall be repair replacement as provided below.

RETURN PROCEDURES. In the unlikely event that a defect should occur, follow the procedure outlined below. Defective products must be shipped, together with a dated sales receipt, freight pre-paid and insured directly to WAMPLER SERVICE DEPT – 5300 Harbor Street, Commerce, CA 90040, USA. A Return Authorization Number must be obtained from our Customer Service Department prior to shipping the product. Products must be shipped in their original packaging or its equivalent; in any case, the risk of loss or damage in transit is to be borne by the purchaser. The Returns Authorization Number must appear in large print directly below the shipping address. Always include a brief description of the defect, along with your correct return address and telephone number.

When emailing to inquire about a returned product, always refer to the Return Authorization Number. If WAMPLER determines that the unit was defective in materials or workmanship at any time during the warranty period, WAMPLER has the option or repairing or replacing the product at no additional charge, except as set forth below. All replaced parts become a property of WAMPLER. Products replaced or repaired under this warranty will be returned via ground shipping within the United States freight prepaid. WAMPLER is not responsible for costs associated with expedited shipping, either to WAMPLER or the return of the product to the customer.

INCIDENTAL OR CONSEQUENTIAL DAMAGE. In no event is WAMPLER liable for any incident or consequential damages arising out of the use or inability of the possibility of such damages, or any other claim by any other party. Some states do not allow the seclusion or limitation of consequential damages, so the above limitation and exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights which may vary from state to state.

FOR YOUR PROTECTION. Please complete the online warranty registration within (10) ten days of the date of purchase so that we may contact you directly in the event of a safety notification issued in accordance with the 1972 Consumer Product Safety Act.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantees that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experience radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s warranty to operate the equipment.

CUSTOMER SUPPORT. Our dedicated staff is ready to help you with any warranty or product questions – please email us at [email protected] or call us on (765) 352-8626.

Please remember to register your pedal as soon as possible after purchase at the following web page to ensure quicker service if you should ever need to make a warranty claim: warranty registration

(2 customer reviews)

2 reviews for Cory Wong: Compressor

  1. Vincent Bath

    Thanks Brian and Cory, I have been playing through your compressor all afternoon and the dynamics after the signal is squished is unreal. I quit using a compressor years ago. No more, not only are the dynamics still present, but enhanced. I plugged the output into my Wampler Analog Echo pedal you repaired for free after I accidently smoked it. I had to turn off the reverb in the amp and play with with saturated tones. Sweet. An achievement worthy of the price, well done.
    Wampler Cory Wong Compressor

  2. Marcelo

    The Cory Wong compressor is a fantastic versatile tool with so many different usable features.
    I own the Ego (big and mini) and I see some little improvement in the tone knob having a bit more clarity or spark if we want it.
    The boost sounds phenomenal and it doesn’t make the tone muddy when you use it with the compressor at the same time.
    I highly recommend it for anyone who cares about good guitar tones and quality sound.
    My only question is: I read that this pedal is high quality op-amp buffered built. So, can we use it in our signal chain as a first BUFFER Input in the chain?
    Can we put The guitar cable straight to the compressor before anything else so it will work as a buffer input?
    Thanks Brian and Wampler team for such a wonderful inspiring little musical Compressor!

Add a review

Your email address will not be published. Required fields are marked *

0
    0
    Your Cart
    Your cart is emptyReturn to Shop